ABS Refill Bundle COLOUR06
ABS Refill Bundle COLOUR06
Refill and reload. A refill bundle containing some of our most popular colours.
-
An ABS refill bundle containing some of our most popular colours from our refill range. Includes 6KG of ABS filament.
Contains: 1 x ABS 1.75mm Natural 1KG Refill 1 x ABS 1.75mm Blue 1KG Refill 1 x ABS 1.75mm Lime Green 1KG Refill 1 x ABS 1.75mm BR Green 1KG Refill 1 x ABS 1.75mm Purple 1KG Refill 1 x ABS 1.75mm Orange 1KG Refill
-
FREE SHIPPING in Australia for all orders over $80. Otherwise flat-rate postage of $11 applies within Australia.
Orders are shipped within 1 business day of order confirmation. You should expect your package within 2-8 business days upon receiving your dispatch confirmation. Read more.
-
We also have a 14-day money-back guarantee on all orders. If you're not happy, we're not happy either. If you don't love our product, you'll get a full refund. Read more.
What’s inside the box?
Why buy from us?
Us
Competitor
Made From Highest Quality Resins
Available On Refillable Spools
Tangle-Free Spooling
Laser Accurate Tolerances
Free Moisture Proof Storage Bag
5+ Year Shelf Life
100% Carbon Neutral Shipping
24-Hour Fulfilment From Australian Warehouse
Afterpay Available
14-Day Moneyback Guarantee
FAQ’s
+ What's an ECO Spool?
The ECO spool is the first reusable spooling system to be sold in Australia. ECO spools are made from high-impact polycarbonate and designed to be reloaded with all filament refills. They're sturdy and durable enough to last a lifetime. The ECO spool accepts all our filament refills across our entire range and cuts down on the amount of single use plastic generated from the 3D printing process.
Held together with 4 x 3mm hex screws, the spool is designed to be taken apart and refilled time and time again.
ECO SPOOL
|
+ How do I refill a Standard Print Co. ECO Spool.
| Step 1: | To re-spool an empty Standard Print Co. ECO spool, first loosen the four securing screws on the reverse face of the spool with a 3mm hex key. |
| Step 2: | After removing the backing plate, slide your naked refill onto the spool |
| Do not cut the filament coil's securing straps at this stage. Doing so will result in the filament uncoiling completely, making it next to impossible to recoil in an orderly manner. | |
| Step 3: | Secure the end of the filament located on the inner diameter of the refill filament coil in the groove located on the inner diameter of the ECO spool before replacing the backing plate of the inner spool. Failure to do this will cause the refill filament coil to spin independently of the ECO spool. |
| Step 4: | Resecure the four screws holding backing plate to the ECO spool. |
| Step 5: | Only after the filament has been secured and backing plate replaced, should a pair of scissors be used to carefully cut and remove the four plastic straps holding the filament coil together being careful not to cut or damage the filament itself. |
+ Do all refill filaments fit on an ECO Spool?
Yes. All refills across our entire material range are designed to fit on our ECO spool.
