PLA Bundle MAKER004

PLA Bundle MAKER004

from $112.00 every 2 months

Included:

1 x ECO Spool
4 x PLA 1KG Refills

Our Promise to You:

๐Ÿ†Slicer Settings For Perfect Prints
โœ… 14-day Moneyback Guarantee
๐Ÿšš Free Delivery Australia Wide

Filament Diameter:
Bundle:
sale
Subscribe
Super Smooth Printing Layers
Moisture Proof Storage Bags
Laser Accurate Filament Diameters
Tangle-Free Filament Spooling
Free Delivery Australia Wide
100% Carbon-Neutral Delivery
 

Whatโ€™s inside the box?

 
 

Why buy from us?

Only pure raw materials and vibrant pigments are used. That means absolute part strength and super smooth printing for your parts.
Lasers ensure industry-leading tolerances of ยฑ0.03mm in our filament meaning no variations in the surface quality of your prints.
Filaments spooled on 100% recyclable cardboard rings, not single-use plastic spools. No more towers of empty spools destined for landfill.
Filament that arrives to your door perfectly dry and stays that way with your filament storage bag and oversized desiccant. Say goodbye to brittle filaments and stringy prints.
Filament refills wound so perfectly that the filament stays coiled even without a spool. Knots and tangles are a thing of the past.
 
 

Us

Competitor

Made From Highest Quality Resins

Available On Refillable Spools

Tangle-Free Spooling

Laser Accurate Tolerances

Free Moisture Proof Storage Bag

5+ Year Shelf Life

100% Carbon Neutral Shipping

24-Hour Fulfilment From Australian Warehouse

Afterpay Available

14-Day Moneyback Guarantee

  
 
 

FAQโ€™s

 

+ What's an ECO Spool?

The ECO spool is the first reusable spooling system to be sold in Australia. ECO spools are made from high-impact polycarbonate and designed to be reloaded with all filament refills. They're sturdy and durable enough to last a lifetime. The ECO spool accepts all our filament refills across our entire range and cuts down on the amount of single use plastic generated from the 3D printing process.

Held together with 4 x 3mm hex screws, the spool is designed to be taken apart and refilled time and time again.

ECO SPOOL

Construction

Polycarbonate, Steel

Colour:

Transparent

Weight: 

225g ยฑ 2g

Required Tool:

3mm Hex Key

Dimensions: 

Outer Diameter: 200mm
Inner Diameter: 81mm
Exterior Side Depth: 66mm
Interior Side Depth: 60mm

SIDE81.0060.0053.0066.00FRONT200.0053.0081.00

+ How do I refill a Standard Print Co. ECO Spool.

How to refill a Standard Print Co. ECO Spool

Step 1: To re-spool an empty Standard Print Co. ECO spool, first loosen the four securing screws on the reverse face of the spool with a 3mm hex key.
Step 2: After removing the backing plate, slide your naked refill onto the spool
  Do not cut the filament coil's securing straps at this stage. Doing so will result in the filament uncoiling completely, making it next to impossible to recoil in an orderly manner.
Step 3: Secure the end of the filament located on the inner diameter of the refill filament coil in the groove located on the inner diameter of the ECO spool before replacing the backing plate of the inner spool. Failure to do this will cause the refill filament coil to spin independently of the ECO spool.
Step 4: Resecure the four screws holding backing plate to the ECO spool.
Step 5: Only after the filament has been secured and backing plate replaced, should a pair of scissors be used to carefully cut and remove the four plastic straps holding the filament coil together being careful not to cut or damage the filament itself.

+ Do all refill filaments fit on an ECO Spool?

Yes. All refills across our entire material range are designed to fit on our ECO spool.

You may also be interested in: